The ground-breaking Harley-Davidson CANbus controller provides plug& play connection and intelligent control of aftermarket and genuineHarley-Davidson accessories right from your bikes original switches orDENALI Accessory Manager Software. Simply connect the CANsmartController to your Harley-Davidson diagnostic port to access over 35programmable accessory settings that provide intelligent control ofauxiliary lights, horns, brake lights, or any other accessory you canimagine. The four accessory circuits are electronically fused and canprovide up to 25 peak amps (10 amps continuous).

Gen II -More Features, More Power, More Versatile

Unlike the Gen ICANsmart, all four circuits of the Gen II can provide a full 10 amps ofcontinuous power and each circuit can be configured to run any accessorytype. The maximum power draw for the whole unit remains at 30 ampscontinuous. The Gen II also features two new auxiliary light settings. Youcan now modulate your auxiliary lights for added conspicuity, and set yourleft and right side lights to independently cancel when you activate yourcorresponding turnsignal

Features:

• High/LowSync– Set auxiliary lights to switch between a programmablehigh/low setting with the factory high beam switch.
• ON/OFFand Dim– Independently control two sets of lights ON/OFF andchange intensity level (for both day and night) right from your originalvehicle switches.
• Modulate Lights– Set auxiliarylights to modulate to increase your visibility to othermotorists.
• Flash to Pass– Need to get someone’sattention? Pulse your high beam switch three times and your auxiliarylights will strobe three times fast.
• Cancel With TurnSignal– This feature cancels the corresponding auxiliary lightwhen you turn your turn signal on preventing powerful auxiliary lights fromoverpowering your signal.
• Inverse Flashing WithHazards– This features flashes your auxiliary lights inversely toyour hazard lights, increasing visibility during roadsideemergencies.
• Plug & Play Horn Installation-Quickly and easily connect high-power aftermarket horns like ourSoundBomb without having to add an additional harness orrelay.
• Strobe with Horn– With this featureselected the CANsmart software will automatically strobe yourauxiliary lights when you sound your horn. This feature works whether youhave the factory horn or SoundBomb horninstalled.
• Deceleration Activated “Smart Brake”Technology– The CANsmart reads vehicle speed in real-timeto activate your auxiliary brake light during deceleration before you eventouch the brake. You can adjust the sensitivity and minimum speed at whichthe Smart Brake Feature will activate.
• Flash PatternBraking– The CANsmart provides four different flashpatterns that make our super bright auxiliary brake lights even noticeableto motorists behind you. You can set auxiliary brake lights to only flashunder hard braking, flash continuously as your brake is applied, or flashfour times rapidly then hold steady (California legal flashrate).
• Circuit Function Selector-The CircuitFunction Selector in the CANsmart software will let you run any accessoryof your choice on any of the four circuits. Click on a circuit icon to openthe drop-down menu and make your selection from the list of availablecircuit functions.
• Switched Power Source– TheCANsmart provides a universal “accessory” option that simply givesyou clean switched 12V power. That means whatever accessory you connect tothis circuit will turn on and off with your ignition.
• DelayTime Out– You can also set the accessories on this circuit to havea delayed time out. This will keep them powered for up to 30 seconds afteryour turn off your bike.
• On Board Power– The”accessory” circuit option is ideal for powering your GPS, phone, heatedgear or any other electronic device.

Whats InThe Box?

• CANsmart Controller
• (x2) 5.5ftLight Extension Cables
• 5ft SoundBomb Horn ExtensionCable
• B6 Brake Light WiringAdapter
• Zip-ties
• Adhesive Hook-and-LoopFastener
• Micro USB Programming Cable

Harness the flexibility and intelligence of your Harley-Davidson’s CANbus electrical system to make installation of accessories drastically easier with the DENALI CANsmart Controller. The ground- breaking Harley-Davidson CANbus controller provides plug & play connection and intelligent control of aftermarket and genuine Harley- Davidson accessories right from your bike’s original switches or DENALI Accessory Manager Software.

Simply connect the CANsmart Controller to your Harley-Davidson diagnostic port to access over 35 programmable accessory settings that provide intelligent control of factory passing lamps, auxiliary lights, horns, brake lights, or any other accessory you can imagine. The four accessory circuits are electronically fused and can provide up to 25 peak amps (10 amps continuous).

The CANsmart H-D is compatible with over 60 Harley-Davidson models including all Sportster, Dyna, Softail, Touring, CVO, and Trike models from 2014 to present.

Features:
– High/Low Sync. Set passing lamps and auxiliary lights to switch between a programmable high/low setting with the factory high beam switch.
– On/OFF and Dim. Independently control two sets of lights on/off and intensity level (for both day and night) right from your bikes factory trip switch. Click three times to turn lights on/off, or hold for 3 seconds to enter dimming mode where you can cycle between 10%-100% intensity.
– Modulate Lights. Set passing lamps or auxiliary lights to modulate to increase your visibility to other motorists.
– Flash to Pass. Need to get someone’s attention? Pulse your high beam switch three times and your auxiliary lights will strobe three times fast.
– Cancel With Turn Signal. This feature cancels the corresponding auxiliary light when you turn your turn signal on preventing powerful auxiliary lights from overpowering your signal
– Plug & Play Horn Installation. Quickly and easily connect high power aftermarket horns like our SoundBomb without having to add an additional harness or relay.
– Strobe with Horn. With this feature selected the CANsmart will automatically strobe your passing lamps or auxiliary lights when you sound your horn. This feature works whether you have the factory horn or SoundBomb horn installed.
– Deceleration Activated “Smart Brake” Technology. The CANsmart reads vehicle speed in real time to activate your brake light during deceleration before you even touch the bake. You can adjust the sensitivity and minimum speed at which the Smart Brake Feature will activate.
– Flash Pattern Braking. The CANsmart provides four different flash patterns that make our super bright auxiliary brake lights even noticeable to motorists behind you. You can set auxiliary brake lights to only flash under hard braking, flash continuously as your brake is applied or flash four times rapidly then hold steady (California legal flash rate).
– Compatible with Genuine Harley-Davidson Accessories. The CANsmart can provide “smart brake” and flash pattern braking to a wide variety of accessories including Harley-Davidson aftermarket LED brake lights.
– Switched Power Source. The CANsmart provides a universal “accessory” option which simply gives you clean switched 12V power. That means whatever accessory you connect to this circuit will turn on and off with your ignition.
– Delay Time Out. You can also set the accessories on this circuit to have a delayed time out. This will keep them powered for up to 30 seconds after your turn off your bike.
– On Board Power. The “accessory” circuit option is ideal for powering your GPS, phone, heated gear or any other electronic device.

Whats In The Box?
CANsmart Controller
2x 5.5ft Light Extension Cables
2x OEM Passing Lamp Wiring Adapters
5ft SoundBomb Horn Extension Cable
B6 Brake Like Wiring Adapter
Zip-ties
Adhesive Hook-and-Loop Fastener
Micro USB Programming Cable
CANsmart Accessory Manager Software